© Christina Gibbs - December 20, 2002 - www.tcgibbs.com
This tutorial may not be copied and placed on another site without my written permission.
The image you create by following this tutorial belongs to you and you may do whatever you want with that.

This was made using Paint Shop Pro 7

You will need to download the selections and unzip them to a folder of your choice.
I have included the popcorn tube I used for this incase you do not have it.

Here are the colors we will use for this, save this image and open in psp for reference.

Open a new image width = 550 height = 250 on a transparent background.

Go to Selections - Load From Disk and browse to the folder you saved these selections into and open the 1-bearleg.sel, fill with the color #1 and deselect (CTRL - D) On the same layer load the 2-bearleg.sel and go to Colors - Adjust - Brightness/Contrast (SHIFT - B) changing the brightness to -50 and the contrast at 0. Deselect. Go to Effects - Noise and add 6% uniform noise.

Add a new raster layer (Layers - New Raster Layer) and load the 3-bearbody.sel, fill with the same color #1 and deselect. On the same layer load the 4-bearbody.sel and adjust the brightness (SHIFT - B) with the same settings and deselect. Add 6% uniform noise.

Add a new raster layer and load the 5-beartail.sel, fill this with the color #2 and deselect. On the same layer load the 6-beartail.sel and adjust the brightness with the same settings and deselect. Add 6% uniform noise.

Add a new raster layer and load the 7-beararm.sel, fill with the color #1 and deselect. On the same layer load the 8-beararm.sel and adjust the brightness, same settings, and deselect. Add 6% uniform noise.

Add a new raster layer and load the 9-beararm.sel, fill with the same color #1 and deselect. On the same layer load the 10-beararm.sel and adjust the brightness, same settings and deselect. Add 6% uniform noise.

Add a new raster layer and load the 11-bearhead.sel, fill with the same color #1 and deselect. On the same layer load the 12-bearhead.sel and adjust the brightness, same settings and deselect. Add 6% uniform noise.

Add a new raster layer and load the 13-bearears.sel, fill this with the color #2 and deselect. On the same layer load the 14-bearears.sel and adjust the brightness with the same settings and deselect. Add 6% uniform noise.

Add a new raster layer and load the 15-beareyes.sel, fill with black and deselect. Go to Effects - 3D Effects - Inner Bevel using the settings below...

Still on the eyes go to Effects - 3D Effects - Drop Shadow with these settings...

Vertical = 0
Horizontal = 0
Opacity = 100
Blur = 6
Color = Black

Add a new raster layer and load the 16-bearmuzzle.sel, fill with the color #2 and deselect. On the same layer load the 17-bearmuzzle.sel and adjust the brightness, same settings, deselect. Add 6% uniform noise.

Add a new raster layer and load the 18-bearnose.sel, fill with black, go to Effects - 3D Effects - Inner Bevel changing the Depth to 26 and leaving the rest the same. Deselect.

You can merge all the layers if you want by going to Layers - Merge - Merge Visible....

Add a new raster layer and load the 19-bowl.sel, fill with #9091AE and deselect. Go to Effects - 3D Effects - Cutout with the settings shown below.

On the same layer load the 20-bowltop.sel and fill with #ABACC3 and deselect.

Add a new raster layer and name this layer POPCORN, leave this empty for now...

Add a new raster layer and load the 21-bowlbottom.sel, fill with the same color and deselect. Apply a cutout with the settings shown below.

On the same layer load the 22-bowlhearts.sel and fill with your choice, I used #3C3D50. Still on the same layer load the 23-bowltop.sel and fill with #ABACC3 and deselect.

Now make the empty POPCORN layer your active layer and use the tube I have included in the zip file to fill the bowl up with popcorn...

Make the very top layer your active layer, add a new raster layer and load the 24-bearlegs.sel, fill this with the color #3 and deselect. On the same layer load the 25-bearlegs.sel and adjust the brightness using the same settings and deselect. Add 6% uniform noise.

Add a new raster layer and load the 26-bearbody.sel, fill with the same color #3 and deselect. On the same layer load the 27-bearbody.sel and adjust the brightness, same settings and deselect. Add 6% uniform noise.

Add a new raster layer and load the 28-beararm.sel, fill with the same color #3 and deselect. On the same layer load the 29-beararm.sel and adjust the brightness, same settings and deselect. Add 6% uniform noise.

Add a new raster layer and load the 30-beararm.sel, fill with the same color #3 and deselect. On the same layer load the 31-beararm.sel and adjust the brightness, same settings and deselect. Add 6% uniform noise.

Add a new raster layer and load the 32-bearhead.sel, fill with the same color #3 and deselect. On the same layer load the 33-bearhead.sel and adjust the brightness, same settings and deselect. Add 6% uniform noise.

Add a new raster layer and load the 34-beareyes.sel, fill with black, deselect and use an Inner Bevel with the settings shown below and then a Drop Shadow with the same settings as before.

Add a new raster layer and load the 35-bearmuzzle.sel, fill with the color #4 and deselect. On the same layer load the 36-bearmuzzle.sel and adjust the brightness, same settings, deselect and add 6% uniform noise.

Add a new raster layer and load the 37-bearnose.sel and fill with black. Use the same Inner Bevel changing the "Depth" to 26 and the "Angle" to 0. Deselect

Add a new raster layer and load the 38-bearears.sel, fill with the color #4 and deselect. On the same layer load the 39-bearears.sel and adjust the brightness, same settings, deselect and add 6% uniform noise.

The End....