© Christina Gibbs - November 03, 2002 - www.tcgibbs.com
This tutorial may not be copied and placed on another site without my written permission.
The image you create by following this tutorial belongs to you and you may do whatever you want with that.

This was made using Paint Shop Pro 7

You will need to download the selections and save them in a folder of your choice.

This tutorial assumes you have a good working knowledge of psp and the tools needed.

I used a pretty big canvas size for this and there are a lot of steps involved
remember to save often

Open a new image 500 x 950 on a transparent background

Selections - Load from disk - load the 1-legs.sel and fill with #5E6C7A deselect

On the same layer load the 2-legs.sel and fill with white deselect. You can skip this part if you are using a pattern.

On the same layer load the 3-legs.sel and go to Colors - Adjust - Brightness/Contrast changing the brightness to -75 and the contrast at 0 deselect

On the same layer load the 4-legs.sel and adjust the brightness = 75 and deselect.

Layers - New raster layer - load the 5-shoes.sel and fill with #876B5B deselect

On the same layer load the 6-shoes.sel and adjust the brightness = -75 and deselect

On the same layer load the 7-shoes.sel and adjust the brightness = 75 and deselect

On the same layer load the 8-shoes.sel and fill with #2A201A go to Effects - 3D Effects - Inner Bevel using the settings below and deselect

On the same layer load the 9-shoes.sel fill with the same #2A201A and apply the same inner bevel changing the Angle to 175 in the settings and deselect.

On the same layer load the 10-shoes.sel and fill with white, go to Effects - Texture - Sculpture and use the default settings for "Gold" in the drop down menu. Deselect

Add a new raster layer and load the 11-backhand.sel and fill with #5B7D5B - Selections - Float and then Effects - 3D Effects - Cutout using the settings below and deselect.

Add a new raster layer and load the 12-backarm.sel fill with #B74343 and deselect

On the same layer load the 13-backarm.sel and adjust the brightness = -75 and deselect

On the same layer load the 14-backarm.sel and adjust the brightness = 75 and deselect

Go to Effects - Noise - Add 3% uniform noise

Add a new raster layer and load the 15-backarm.sel fill with #B19C91 and deselect

On the same layer load the 16-backarm.sel and fill with #D9CFC9 and deselect

On the same layer load the 17-backarm.sel fill with white and deselect

Add a new raster layer and load the 18-coat.sel fill with #B74343 and deselect

On the same layer load the 19-coat.sel and adjust the brightness = -75 and deselect

On the same layer load the 20-coat.sel and adjust the brightness = 75 and deselect

Add 3% uniform noise

Add a new raster layer and load the 21-coat.sel fill with #B19C91 and deselect

On the same layer load the 22-coat.sel and fill with #D9CFC9 deselect

On the same layer load the 23-coat.sel fill with white and deselect

Add a new raster layer load the 24-coat.sel and fill with #B74343 deselect

On the same layer load the 25-coat.sel and adjust the brightness = -75 and deselect

On the same layer load the 26-coat.sel and adjust the brightness = 75 and deselect

Add 3% uniform noise

Add a new raster layer load the 27-coat.sel and fill with #B19C91 deselect

On the same layer load the 28-coat.sel and fill with #D9CFC9 and deselect

On the same layer load the 29-coat.sel fill with white and deselect

Add a new raster layer load the 30-belt.sel fill with black and deselect

On the same layer load the 31-belt.sel and adjust the brightness = 250 and deselect

Add a new raster layer and load the 32-belt.sel fill with white and apply the same gold sculpture and deselect

Add a new raster layer and load the 33-buttons.sel fill with white and use the same gold sculpture again and deselect

Add a new raster layer and load the 34-bells.sel and fill with #6C4632 then go to Effects - 3D Effects - Drop Shadow using the settings below and deselect

Vertical = 0
Horizontal = 0
Opacity = 80
Blur = 18.5
Color = Black

Add a new raster layer load the 35-hand.sel fill with #5B7D5B - Selections - Float and apply the same cutout as before and deselect

Add a new raster layer load the 36-arm.sel fill with #B74343 and deselect

On the same layer load the 37-arm.sel and adjust the brightness = -75 and deselect

On the same layer load the 38-arm.sel and adjust the brightness = 75 and deselect

Add 3% uniform noise

Add a new raster layer load the 39-arm.sel and fill with #B19C91 deselect

On the same layer load the 40-arm.sel and fill with #D9CFC9 deselect

On the same layer load the 41-arm.sel fill with white and deselect

Here is what you should have so far....

Add a new raster layer load the 42-bells.sel and fill with #81553D deselect

On the same layer load the 43-bells.sel and adjust the brightness = 75 and deselect

On the same layer load the 44-bells.sel and fill with #D8AE59 while still selected apply an inner bevel with the settings below

Then while still selected apply a drop shadow with the same settings as before deselect

On the same layer load the 45-bells.sel fill with black and deselect

Add a new raster layer load the 46-head.sel fill with #DEC5B2 and deselect

On the same layer load the 47-head.sel fill with #C39C7F and deselect

On the same layer load the 48-cheeks.sel and fill with #C56F71 deselect

Add a new raster layer load the 49-hat.sel fill with #B74343 deselect

On the same layer load the 50-hat.sel and adjust the brightness = -75 and deselect

On the same layer load the 51-hat.sel and adjust the brightness = 75 and deselect

Add 3% uniform noise

Add a new raster layer load the 52-beard.sel and fill with #B19C91 deselect

Add a new raster layer load the 53-mouth.sel and fill with #5B4F49 deselect

On the same layer load the 54-mouth.sel and fill with #C56F71 deselect

On the same layer load the 55-mouth.sel and adjust the brightness = 75 and deselect

Add a new raster layer and load the 56-nose.sel fill with #DEC5B2 and deselect

Add a new raster layer and load the 57-face.sel fill with white and deselect

Add a new raster layer and load the 58-eyes.sel fill with black and deselect

On the same layer load the 59-eyes.sel (( It's a little selection in the eyes, you may need to zoom in on the canvas )) fill this with white and deselect

On the same layer load the 60-eyes.sel and fill with #5E6C7A deselect

Add a new raster layer and load the 61-hat.sel fill with #B19C91 and deselect

On the same layer load the 62-hat.sel and fill with #D9CFC9 and deselect

On the same layer load the 63-hat.sel and fill with white and deselect

Add a new raster layer and load the 64-beard.sel fill with #D9CFC9 and deselect

On the same layer load the 65-beard.sel and fill with white deselect

On the same layer load the 66-beard.sel fill with white and deselect

Add a new raster layer load the 67-beard.sel and fill with #D9CFC9 deselect

On the same layer load the 68-beard.sel and go to Selections - Modify - Feather = 1 then fill with white and deselect

Add a new raster layer load the 69-tree.sel and fill with #6C4632 deselect

On the same layer load the 70-tree.sel and fill with #876B5B deselect

On the same layer load the 71-tree.sel and adjust the brightness = 75 and deselect

On the same layer load the 72-needles.sel and fill with #27472F deselect

On the same layer load the 73-needles.sel fill with #5B7D5B deselect

On the same layer load the 74-needles.sel and fill with #77A582 and deselect.... The End...