This tutorial was written using Paint Shop Pro 7.

You will need to download these Selections and save them in a folder of your choice

Here are the colors we will use



This tutorial assumes you have a good working knowledge of PSP and the tools needed.

Remember to save your image often.

Open a new image 775 x 250 on a transparent background

Go to selections - load from disk - open the 1.sel - fill with color #8 - deselect

Same layer load the 2.sel - fill with color #2 - deselect

Same layer load the 3.sel - fill with same color #2 - deselect

Same layer load the 4.sel - fill with color #1 - deselect

Same layer load the 5.sel - fill with color #8 - deselect

New raster layer - load the 6.sel - fill with the same color #8 - deselect

Same layer load the 7.sel - fill with color #9 - deselect

Same layer load the 8.sel - fill with color #10 - deselect

New raster layer - load the 9.sel - fill with color #5 - Go to effects - 3d effects - inner bevel using the settings below - deselect

Same layer load the 10.sel - fill with white - apply the same inner bevel - deselect

New raster layer - load the 11.sel - fill with color #1 - deselect

Same layer load the 12.sel - fill with color #2 - deselect

Same layer load the 13.sel - fill with color #3 - deselect

Same layer load the 14.sel - go to colors - adjust - brightness/contrast changing the brightness to -20 contrast at 0 and deselect

Add a new raster layer - load the 15.sel - fill with your color/pattern you are using for the dress - deselect and adjust the brightness for this layer to -30

New raster layer - load the 16.sel - fill with color #1 - deselect

Same layer load the 17.sel - fill with color #2 - deselect

Same layer load the 18.sel - fill with color #3 - deselect

New raster layer - load the 19.sel - fill with color #1 - deselect

Same layer load the 20.sel - fill with color #2 - deselect

Same layer load the 21.sel - fill with color #3 - deselect

New raster layer - load the 22.sel - fill with color #1 - deselect

Same layer load the 23.sel - fill with color #2 - deselect

Same layer load the 24.sel - fill with color #3 - deselect

New raster layer - load the 25.sel - fill with your dress pattern/color - deselect

Same layer load the 26.sel - adjust the brightness to -30 and deselect

Same layer load the 27.sel - adjust the brightness to 35 and deselect

Here I used the selection tool to select one of the dresses and colorized it pink so they would be different, this is up to you though...

New raster layer - load the 28.sel - fill with your choice, I used color #7 - deselect

Same layer load the 29.sel - adjust the brightness to about -20 or -30 and deselect

Same layer load the 30.sel - adjust the brightness to about 35 and deselect.

Same layer load the 31.sel - adjust the brightness to about -20 and deselect

New raster layer - load the 32.sel - fill with white - deselect

Same layer load the 33.sel - fill with color #5 - selection, modify, contract and change the number to 4 - apply the same inner bevel as before changing the smothness to 100 - deselect

New raster layer - load the 34.sel - fill with color #1 - deselect

Same layer load the 35.sel - fill with color #2 - deselect

Same layer load the 36.sel - fill with color #3 - deselect

Same layer load the 37.sel - adjust the brightness to -20 and deselect

New raster layer - load the 38.sel - fill with color #1 - deselect

Same layer load the 39.sel - fill with color #2 - deselect

Same layer load the 40.sel - fill with color #3 - deselect

New raster layer - load the 41.sel - fill with color #5 - deselect

Same layer load the 42.sel - fill with white - deselect

New raster layer - load the 43.sel - fill with color #2 - deselect

Same layer load the 44.sel - fill with white - deselect

Same layer load the 45.sel - fill with black - deselect

Same layer load the 46.sel - you will not see this selection :-) adjust the brightness to 200 and deselect, you should see little highlights in the eyes.

New raster layer - load the 47.sel - fill with your choice, I used color #7 - deselect

New raster layer - load the 48.sel - fill with color #4 - apply the same inner bevel and deselect

Same layer load the 49.sel - fill with color #6 - apply the same inner bevel and deselect

Same layer load the 50.sel - fill with white - apply the same inner bevel and deselect..

Your bunnies are finished!